Trane GBC048A3EMB0000, Foundation Series, 4T, 14 SEER, 2 Stage Gas/Electric Package Unit

AFUE	:	80 %
CFM Rating	:	1,600 cfm
Cooling Capacity	:	48,000
Efficiency Rating	:	14
Energy Star Rated	:	N
Flow Control	:	TXV
Frequency Rating	:	60 Hz
Heatring Capacity	:	92,200
Input BTU Rating	:	48,000 Btu/hr
Max Fuse	:	35 amps
Model	:	GBC
Motor Type	:	FC
Number of Stages	:	Two
Phase	:	3 ph
Refrigerant Type	:	R-410A
Series	:	Foundation
Tonnage	:	4.0 ton
Voltage Rating	:	208/230 V

Trane GBC048A3EMB0000, Foundation Series, 4T, 14 SEER, 48,000 BTU Cooling, 92,200 BTU Heating, HSPF 80%, R410A, TXV Metering, 3 Phase, 2 Stage Gas/Electric Package Unit

Foundation™ contains the best compressor technology available to achieve the highest possible performance. Dual stages from manifold compressors are outstanding for humidity control and part load cooling conditions.This 24-volt control includes the control transformer and contactor pressure lugs for power wiringFoundation™ units ship in the downflow configuration. A horizontal conversion kit, consisting of two downflow duct covers, is needed to convert the unit from a downflow to a horizontal airflow configuration. Units come complete with horizontal duct flanges so the contractor doesn't have to field fabricate them. These duct flanges are a time and cost saver. Units also have the ability to fit Trane and other competitors roof curbs (Carrier). In a matter of minutes, you can go from the Trane configuration to the Carrier configuration by simply changing the return air opening plate. This design allows for easy field conversion and eliminates the need for costly adapter curbs.A bi-metal element discharge line thermostats installed as a standard feature on the discharge line of each compressor. This standard feature provides extra protection to the compressors against high discharge temperatures in case of loss of charge, extremely high ambient and other conditions which could drive the discharge temperature higherAll panels in the evaporator section of the unit have foil-faced, glass fiber insulation. All base panels have foil-faced, glass fiber insulation. All edges are either captured or sealed to ensure no insulation fibers get into the airstream.All Foundation units have cooling capabilities down to 45°F as standardMicrochannel condensing coils are all-aluminum coils with fully-brazed construction. This design reduces risk of leaks and provides increased coil rigidity — making them more rugged on the jobsite. Their flat streamlined tubes with small ports and metallurgical tube-to-fin bond allow for exceptional heat transfer. Microchannel all-aluminum construction provides several additional benefits: • Light weight (simplifies coil handling) • Easy to recycle • Minimize galvanic corrosionMulti-speed indoor fan system is designed for use in applications for meeting the minimum requirement of CA Title 24. This system incorporates a multi-speed fan control to change the speed of the fan to 66% of full airflow based off compressor stages.